3D print

3D print

The PrusaHand is printed on the Original Prusa i3 MK2 3D printer.


All parts are printed from the ABS-T 1,75 mm filament.

Nozzle temperature: 255-270 °C

Nozzle diameter: 0,4 mm

Layer height: 0,2 mm

Heat Bed temperature: 100 °C

Sliced in Simplify 3D (you can use Slic3r, but you will have more work with removing support material. In Simplify 3D you can choose which supports not to generate at all).

Support material: Yes

Brim: Yes (10 mm / 0,39″)

Infill: Grid pattern / 15 %

Bottom solid layers: 4

Top solid layers: 6

#  perimeters: 3 (1,2 mm)